Have you got the right tools for the required machining? Is there a design error? Will you be able to bend it in one piece or will you have to cut it and build it in several pieces? With COMPUTES BEND AutoPOL you can check for problems (such as part interference during bending) and take the right decision without wasting time and materials.
While you are creating the program on the CNC, the press brake is blocked. Moving the programming in the office will free valuable resources in the workshop.
COMPUTES BEND AutoPOL automatically calculates the machine tools setup, the optimized bending sequence, the position of the NC generation, the generation of the documentation for the machine operator. For more complex pieces, a good operator will help the program to arrive at the most optimized solution.
The calculation of the 2D flat pattern view is no longer theoretical but it' s done considering the tools that will be used for bending. The task of those who will have to deal with welding and assembly is simplified.
From drawing to sending the bending sequence, COMPUTES BEND AutoPOL is the solution for single part bending.
Have you got more press brakes with different CNC? Don't worry COMPUTES BEND AutoPOL can handle the tooling search and simulation of the bending process in any case without any problems. COMPUTES BEND AutoPOL includes post processors from all manufacturers who have opened up their CNC. For all of these it is also possible to send the program directly to the machine.
COMPUTES BEND AutoPOL is based on a true parametric 3D drawing environment that allows you to open and manage individual parts from other 3D CADs. The commands are available to modify the parts and to correct typical errors made by the technical studies, i.e. the bending radius and bending reliefs. It is possible to divide a solid into several parts in case it is not possible to bend it into a single piece. With the optional DESIGN module you can also create single, parametric parts from scratch.
Allows you to create a 3D drawing from a 2D flat view imported from the DXF format.
It includes a catalogue of parametric shapes of difficult designing and realization. Hoppers, couplings, fittings, sector curves, are just a few examples of the details available.
The software automatically chooses the type of punches and dies among those available in the customer's real warehouse or from a restricted set defined by the operator. In case there is no solution with such tools, it is possible to perform a search among the catalogues of the major manufacturers.
The software looks for the bending sequence that minimizes the number of tools, the movements of the part and operator basing on the priority assigned to each one. It then defines how many tool stations to use and the composition of the stations based on the fractions available in stock. If the post processor for the CNC is available, the software creates the file that only needs to be loaded and run on the CNC. If the post processor is not available then the software creates a PDF documentation that can be passed to the machine operator who will then be able to create the program quickly with the CNC.
The experience of the "older" operator can be saved within COMPUTES BEND AutoPOL. Through the software it is possible to save the final result of what has been the research to the optimization of the bending cycle. This allows even a novice operator to repeat, with maximum efficiency, the bending cycle performed by the most experienced operator.
COMPUTES BEND AutoPOL allows you to save the flat view to be cut after the bend simulation after choosing the appropriate tools to use. Only during the bending phase, in fact, you realize which tools are the best to use.
It manages the automatic processing of all single 3D files that the software finds in a reference directory.
This module is ideal for those who need to create programs for a large number of parts that don' t require any special precautions for the creation of the program.
The report shows the work progress.
Not only that. It optimizes time and prepares the work for the next day. When? At night. No need to employ workers, just program the process of the files at night and "BATCH & REMOTE" will automatically check them one by one. If a file has problems for which no solution is found immediately, COMPUTES BEND AutoPOL will move on to the next file.
Headquarters:
Street Lorenzo Gonella 1
29029 Niviano - (PC) - Italy
Legal head office: Street Ancillotti, 8
29122 Piacenza - (PC) - Italy
VAT number: 01801720333
REA: PC - 192404
PEC: This email address is being protected from spambots. You need JavaScript enabled to view it.
Via Lorenzo Gonella, 1
29029 Niviano (PC) - Italia
+39 0523.1860500
This email address is being protected from spambots. You need JavaScript enabled to view it.
ul. Królowej Jadwigi 237
30-218 Kraków - Poland
+48 12 631 93 00 This email address is being protected from spambots. You need JavaScript enabled to view it.